bluegrass paint and supply logo bluegrass paint and supply slogan
859-885-7276 . 800-888-0480 . Fax 859-887-1799
color products paint for buildings of all types
black products white products red products aluminum products color products   house email telephone questions

Enamel Pro Green Keenland Green Enamelcoat Green Enamel Pro Brown Enamel Coat Gray Shopcoat Roof Coat Aluminum Paste

Enamel Pro Green


Enamel Pro Green is an extremely economical 100% acrylic latex green paint. Enamel Pro has a semi-gloss finish and cleans up with soap and water. This paint resists mold and mildew while providing a superior hide to other green agricultural paints. One of the advantages of a gloss product is that dirt and other contaminants do not stick to it as easily therefore keeping the paint cleaner and brighter lengthening life and time between recoating.  Enamel Pro Green is suitable for fences, barns, concrete, non-rusty metal and other applications. Over the last 20 years Enamel Pro Green has risen to become the choice of contractors, painters, property owners and farmers when preforming property maintenance nationwide. Enamel Pro Green can be easily applied with airless sprayer or rollers/brushes. Recommended coverage per gallon: 16 linear feet of 3 or 4 board fence (both sides), 25 feet of single top board (both sides), 300 square feet on most flat barn surfaces. WARNING: Protect from freezing, allow adequate dry time before rain, dew or frost.





Color - Green

Finish - Semi-gloss 30 to 40 units @ 60 degrees

Drying time - @ 77F and 50% relative humidity

To touch: 1 hour Re-coat: 4 hours

Flash point - 201FF (PMCC)

VOC - less than 250 grams/liter


Recommended coverage rate:

3 & 4 board plank fence - 16 running feet per gallon (both sides)

1 board plank fence - 16 running feet per gallon (both sides)

Barns - 300 to 350 sq. feet per gallon on smooth surfaces



Package - 5 gal pails and 55 gallon drums








Apply with brush, roller or spray at full body

Airless spray requirements:

Pressure - 1500 2500psi

Minimum output .5 gpm

Filter 60 mesh

Tip: .017" to .021"

Mix thoroughly before applying

Fence preparation - For greatest durability make sure fence is scraped thoroughly by removing all peeling or flaking paint.  Pressure washing is recommended in severe situations. 

In areas where mildew is a problem always scrub the surface first with commercial mildew remover or bleach solution

Allow new wood to age 1 to 3 months to reduce moisture content

(less than 15% recommended).


Clean up with soap and water


enamel pro green paint for fences and barns


Black Products  |      White Products  |       Red Products  |      Aluminum Products  |    Color Products


Copyright © 2014 Lexington Paint and Supply

Powered And Made Visible To The Web

Web Opts Of KY, LLC