bluegrass paint and supply logo bluegrass paint and supply slogan
859-885-7276 . 800-888-0480 . Fax 859-887-1799
white products paint for barns and fences
black products white products red products aluminum products color products   house email telephone questions



Fence and Barn White Enamel Pro White Fence Pro White Duracoat White Flex Coat White white fencing around horse arena

Fence Pro White


Fence Pro White is an extremely economical 100% acrylic latex white paint. Fence Pro has a flat finish and cleans up with soap and water. This paint resists mold and mildew while providing a superior hide to other white agricultural paints. Fence Pro White is suitable for fences, barns, concrete, non-rusty metal and other applications. Over the last 20 years Fence Pro White has risen to become the choice of contractors, painters, property owners and farmers when preforming property maintenance nationwide. Fence Pro White can be easily applied with airless sprayer or rollers/brushes. Recommended coverage per gallon: 16 linear feet of 3 or 4 board fence (both sides), 25 feet of single top board (both sides), 300 square feet on most flat barn surfaces. WARNING: Protect from freezing, allow adequate dry time before rain, dew or frost.






Color - White

Finish - Flat, 2 to 5 units at 60 degree

Drying time - @ 77F and 50% relative humidity

To touch: 30 min. Re-coat: 4 hours

Flash point - above 201F (PMCC)

Viscosity - 90KU


Recommended coverage rate:

3 & 4 board plank fence - 16 running feet per gallon

1 board plank fence - 26 running feet per gallon

Less than recommended applications will see a marked difference in durability.  Two coats may be required when painting new lumber.


Package - 5 gal pails, 55 gal drums

Shelf life - 2 years (unopened, proper agitation)

VOC - less than 250 grams/liter









Apply to fence with brush, roller or spray

Airless spray requirements:

Rating - 0.5 gallons per minute minimum

Pressure - 1800 to 2500psi

Tip - .017" to .021"

Apply at full body

No thinning recommended

Stir thoroughly before applying

Fence preparation - For greatest durability make sure fence is scraped thoroughly by removing any peeling or flaking paint.  In area where mildew is a problem, always scrub the surface with a commercial mildew remover or bleach solution

Allow new wood to age 1 to 3 months to reduce moisture content. (less than 15% recommended)

Application temperature - Above 50F



Clean up with soap and water

CAUTION - On new wood always check for tannin stain by applying to a test area.  If it occurs use an oil based primer (Fence & Barn White)

Allow 24 hours before top-coating with Fence Pro White


fence pro white barn and fence paint


Black Products  |      White Products  |       Red Products  |      Aluminum Products  |    Color Products


Copyright © 2014 Lexington Paint and Supply

Powered And Made Visible To The Web

Web Opts Of KY, LLC