bluegrass paint and supply logo bluegrass paint and supply slogan
859-885-7276 . 800-888-0480 . Fax 859-887-1799
white products paint for barns and fences
black products white products red products aluminum products color products   house email telephone questions



Fence and Barn White Enamel Pro White Fence Pro White Duracoat White Flex Coat White white fencing around horse arena

Flexcoat White


Flexcoat White is an extremely economical 100% acrylic with a strong elastomeric latex white paint. Flexcoat has a flat finish and cleans up with soap and water. This paint resists mold and mildew while providing a superior hide to other white agricultural paints. One of the advantages of an elastomeric product is that the added flexibility and elasticity has proven to be as superior product, in most cases, on rough sawn lumber because it reduces cracking and peeling therefore lengthening life and time between recoating.  Flexcoat White is suitable for fences, barns, concrete, non-rusty metal and other applications. Over the last 20 years Flexcoat White has risen to become the choice of contractors, painters, property owners and farmers when preforming property maintenance nationwide. Flexcoat White can be easily applied with airless sprayer or rollers/brushes. Recommended coverage per gallon: 16 linear feet of 3 or 4 board fence (both sides), 25 feet of single top board (both sides), 300 square feet on most flat barn surfaces. WARNING: Protect from freezing, allow adequate dry time before rain, dew or frost.





Color - White

Finish - Flat, 3 to 5 units at 60 degree


Recommended coverage rate:

3 & 4 board plank fence - 16 running feet per gallon (both sides)

1 board plank fence - 26 running feet per gallon (both sides)

Barns - 300to 350 sq. feet per gallon on smooth surfaces

Drying time - @ 77R and 50% relative humidity

To touch: 1 hour Re-coat: 4 hours


Package: 5 gal pails and 55 gal drums

Flash point - 201F (PMCC)

VOC - less than 250grams/liter








Apply to fence with brush, roller or spray

Airless spray requirements:

Pressure - 1500 to 2500psi

Filter - 60 mesh

Tip - .017" to .023"

Mix thoroughly before applying

Application temperature - Above 50F

Fence preparation - For greatest durability make sure fence is scraped thoroughly by removing all peeling or flaking paint

Pressure washing is recommended in severe situations


CAUTION! - On new wood always check for tannin stain by applying to a test area.  If it occurs use an oil-based primer such as Fence & Barn White.

Allow 24 hours before top-coating with Flexcoat.  In areas where mildew is a problem always scrub the surface first with a commercial mildew remover or bleach solution.

Allow new wood to age 1 to 3 months to reduce moisture content (less than 15% recommended).

Clean up with soap and water


flex coat barn and fence paint


Black Products |      White Products  |       Red Products  |      Aluminum Products  |    Color Products


Copyright © 2014 Lexington Paint and Supply

Powered And Made Visible To The Web

Web Opts Of KY, LLC