bluegrass paint and supply logo bluegrass paint and supply slogan
859-885-7276 . 800-888-0480 . Fax 859-887-1799
white products paint for barns and fences
black products white products red products aluminum products color products   house email telephone questions

Enamelcoat

White

Fence and Barn White Enamel Pro White Fence Pro White Duracoat White Flex Coat White white fencing around horse arena

Enamel Pro White

 

Enamel Pro White is an extremely economical 100% acrylic latex white paint. Enamel Pro has a semi-gloss finish and cleans up with soap and water. This paint resists mold and mildew while providing a superior hide to other white agricultural paints. One of the advantages of a gloss product is that dirt and other contaminants do not stick to it as easily therefore keeping the paint cleaner and brighter lengthening life and time between recoating.  Enamel Pro White is suitable for fences, barns, concrete, non-rusty metal and other applications. Over the last 20 years Enamel Pro White has risen to become the choice of contractors, painters, property owners and farmers when preforming property maintenance nationwide. Enamel Pro White can be easily applied with airless sprayer or rollers/brushes. Recommended coverage per gallon: 16 linear feet of 3 or 4 board fence (both sides), 25 feet of single top board (both sides), 300 square feet on most flat barn surfaces. WARNING: Protect from freezing, allow adequate dry time before rain, dew or frost.

 

_________________________________________________

 

ENAMEL PRO WHITE LATEX

Characteristics:

Color - White

Finish - Semi-Gloss

Drying time - 20 to 30 units at 60° Drying time - @ 77F and 50% relative humidity

To touch: 30 minutes Dry: 30 minutes Re-coat: 4 hours

Viscosity - 115KU @ 77F

Coverage:

Recommended coverage rate:

3 & 4 board plank fence - 16 running feet per gallon (both sides)

1 board plank fence - 26 running feet per gallon (both sides)

Barns - 350 square feet per gallon on smooth surfaces

Recommended coverage rate - 350 sq ft/gal @ 4 mils wet, 1.5 mils dry

VOC - less than 380 grams/liter

Application:

Application temperature - Above 50F

Mix paint thoroughly before application

Surface to be coated should be free of all dirt, grease and oil as well as other contaminates

Rust should be removed with either hand or power tool cleaning

For bare or rusty metal priming with Shopcoat is recommended

Apply with brush, roller or spray

 

 

______________________________

 

 

Attention:

In early stages of drying ENAMEL PRO is sensitive to rain, dew, high humidity and moisture condensation. 

Avoid these conditions during first 4 hours after application

Airless spray requirements:

Pressure - 1200 to 2000psi Filter - 60 mesh Tip - .015" to .019"

Conventional spray - Binks 18 gun, 63C fluid nozzle, 63 PB air nozzle, 50psi atomization pressure, 15-20psi fluid pressure

Thinning - Product can be thinned with up to 15% water for greater economy

Clean up with soap and water

 

enamel white board, barn, and fence paint

 

Black Products |      White Products  |       Red Products  |      Aluminum Products  |    Color Products

 

Copyright © 2014 Lexington Paint and Supply

Powered And Made Visible To The Web

Web Opts Of KY, LLC